Welcome to Octoplus Pro JTAG Software version 1.7.6. Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Broadcom Corp Contacted SmartCard 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J110H
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-J110H_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110142E04C5F4353
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 42E04C5F
Manufacturing date : 04/2016
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/H4G2b_20_04_2019_14_54_19.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: EFS (00015800, 0000A000) 20 MB
P18: PRODNV (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00000800) 1024 KB
P20: KERNEL (00022800, 00008000) 16 MB
P21: RECOVERY (0002A800, 00008000) 16 MB
P22: PERSDATA (00032800, 00004800) 9 MB
P23: CSC (00037000, 00064000) 200 MB
P24: SYSTEM (0009B000, 00203000) 1030 MB
P25: HIDDEN (0029E000, 0001D000) 58 MB
P26: USERDATA (002BB000, 00486000) 2316 MB
Selected pit file: C:/Users/alimobile/Desktop/J110HXXU0AOGA_OXE0AOGC_v4.4.4_Repair_Firmware/J1POP3G.pit
Open file "C:/Users/alimobile/Desktop/J110HXXU0AOGA_OXE0AOGC_v4.4.4_Repair_Firmware/BL_J110HXXU0AOGA_CL737598_QB5784505_REV02_user_low _ship.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...
ERROR[012]: Write error.
At sector 7634911.
Disconnected.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Broadcom Corp Contacted SmartCard 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J110H
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-J110H_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110142E04C5F4353
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 42E04C5F
Manufacturing date : 04/2016
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/H4G2b_20_04_2019_14_54_19.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: EFS (00015800, 0000A000) 20 MB
P18: PRODNV (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00000800) 1024 KB
P20: KERNEL (00022800, 00008000) 16 MB
P21: RECOVERY (0002A800, 00008000) 16 MB
P22: PERSDATA (00032800, 00004800) 9 MB
P23: CSC (00037000, 00064000) 200 MB
P24: SYSTEM (0009B000, 00203000) 1030 MB
P25: HIDDEN (0029E000, 0001D000) 58 MB
P26: USERDATA (002BB000, 00486000) 2316 MB
Selected pit file: C:/Users/alimobile/Desktop/J110HXXU0AOGA_OXE0AOGC_v4.4.4_Repair_Firmware/J1POP3G.pit
Open file "C:/Users/alimobile/Desktop/J110HXXU0AOGA_OXE0AOGC_v4.4.4_Repair_Firmware/BL_J110HXXU0AOGA_CL737598_QB5784505_REV02_user_low _ship.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...
ERROR[012]: Write error.
At sector 7634911.
Disconnected.
No comments:
Write comments