SM-G570F FRP CANT Unlock PLease Help me

SM-G570F FRP CANT Unlock please Help me here log file i flash phone COMBINATION frimware enable adb after unlock done then i reset phone but still lock phone please help me







Welcome to Octoplus Box Samsung software version 2.6.9
-----------------------------------------------------------------------------------
To connect SM-G920A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-G570F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G570F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...
This version of "sBoot" is not supported, try to downgrade "sBoot"!
Operation was failed!
Performed by 2.6.9 Software version.
Selected firmware file: G570FXXU1AQB5_G570FODD1AQB5_INS_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G570F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.9 Software version.
Please put the phone into Download Mode and connect USB cable.
To put SM-G570F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.9 Software version.
-----------------------------------------------------------------------------------



Performed by 2.6.9 Software version.
Selected AP file: G:\GSM ALL\Octoplusbox\Samsung\Full Flash\SM-G570F\COMBINATION_OJV_FA60_G570FXXU1API2_OJV1API2\ COMBINATION_OJV_FA60_G570FXXU1API2_OJV1API2\COMBIN ATION_OJV_FA60_G570FXXU1API2_OJV1API2_CL9218515_QB 10877448_REV00_user_mid_noship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G570F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.9 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G570F
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-G570F
Firmware compiled date: Fri Sep 9 11:27:47 KST 2016
PDA version: FA60_G570FXXU1API2
CSC version: unknown
SW version: G570FXXU1API4
Phone SN: RZ8HA0HCHWV
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7570
HW Modem: SHANNON305
Security patch level: 2016-08-01
SIM 1 status: absent
SIM 2 status: absent
Codename: on5xeltejv
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 2.6.9 Software version.
Selected firmware file: G570FXXU1AQB5_G570FODD1AQB5_INS_Android_6.0.1.oct
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G570F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..unsuccessful
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.9 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A710F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..unsuccessful
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.9 Software version.
Selected firmware file: G570FXXU1AQC2_G570FOJV1AQC2_XSG_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-A710F into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Selected file is declared for SM-G570F model!
File has been created for a different phone model.
Performed by 2.6.9 Software version.
-----------------------------------------------------------------------------------
To connect SM-G570F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: G570FXXU1AQC2_G570FOJV1AQC2_XSG_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G570F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.9 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G570F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..unsuccessful
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (3/4 attempt)..unsuccessful
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (4/4 attempt)..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.9 Software version.