Hi,
I'am trying to recover data from an eMMC on Octoplus Box Pro on win 10 x64. It starts recovering then at 2/3% it stops working.
This is the complete log:
Welcome to Octoplus Pro JTAG Software version 1.6.1.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514531334D420DB4EE6A3F84E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) B4EE6A3F
Manufacturing date : 08/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 933888
Number of sectors : 6291456
Device Manufacturer :HUAWEI
Device Platform :mt6737t
Build ID :HUAWEIMYA-L11
Display Build ID :Maya-L11C02B149
Release ID :6.0
Device Model :MYA-L11
Device Name :MYA-L11
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :MYA-L11-user 6.0 HUAWEIMYA-L11 C02B149 release-keys
Connect successful.
---------------------------------------------------------------
SW: 1.6.1; FW: 1.23.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00006400) 12.5 MB
P03: protect1 (00008000, 00005000) 10 MB
P04: protect2 (0000D000, 00007000) 14 MB
P05: lk (00014000, 00000400) 512 KB
P06: lk2 (00014400, 00000400) 512 KB
P07: para (00014800, 00000400) 512 KB
P08: boot (00014C00, 00008000) 16 MB
P09: recovery (0001CC00, 00020000) 64 MB
P10: logo (0003CC00, 00004000) 8 MB
P11: expdb (00040C00, 00005000) 10 MB
P12: ROOTM (00045C00, 00002400) 4.5 MB
P13: seccfg (00048000, 00004000) 8 MB
P14: oemkeystore (0004C000, 00004000) 8 MB
P15: secro (00050000, 00004000) 8 MB
P16: keystore (00054000, 00004000) 8 MB
P17: tee1 (00058000, 00002800) 5 MB
P18: tee2 (0005A800, 00002800) 5 MB
P19: log (0005D000, 00020000) 64 MB
P20: oeminfo (0007D000, 00024000) 72 MB
P21: erecovery (000A1000, 00020000) 64 MB
P22: frp (000C1000, 00000800) 1024 KB
P23: nvdata (000C1800, 00010000) 32 MB
P24: metadata (000D1800, 00012800) 37 MB
P25: system (000E4000, 00600000) 3072 MB
P26: cust (006E4000, 000C8000) 400 MB
P27: cache (007AC000, 00064000) 200 MB
P28: userdata (00810000, 01506C00) 10.51 GB
P29: flashinfo (01D16C00, 00008000) 16 MB
Partition table has been found on device.
Save to D:/Octoplus Back Up/nuova folder...
Reading partition userdata...
ERROR[007]: Command fail.
At sector 10410976
Attempting to read...
Disconnected.
I'am trying to recover data from an eMMC on Octoplus Box Pro on win 10 x64. It starts recovering then at 2/3% it stops working.
This is the complete log:
Welcome to Octoplus Pro JTAG Software version 1.6.1.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514531334D420DB4EE6A3F84E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) B4EE6A3F
Manufacturing date : 08/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 933888
Number of sectors : 6291456
Device Manufacturer :HUAWEI
Device Platform :mt6737t
Build ID :HUAWEIMYA-L11
Display Build ID :Maya-L11C02B149
Release ID :6.0
Device Model :MYA-L11
Device Name :MYA-L11
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :MYA-L11-user 6.0 HUAWEIMYA-L11 C02B149 release-keys
Connect successful.
---------------------------------------------------------------
SW: 1.6.1; FW: 1.23.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00006400) 12.5 MB
P03: protect1 (00008000, 00005000) 10 MB
P04: protect2 (0000D000, 00007000) 14 MB
P05: lk (00014000, 00000400) 512 KB
P06: lk2 (00014400, 00000400) 512 KB
P07: para (00014800, 00000400) 512 KB
P08: boot (00014C00, 00008000) 16 MB
P09: recovery (0001CC00, 00020000) 64 MB
P10: logo (0003CC00, 00004000) 8 MB
P11: expdb (00040C00, 00005000) 10 MB
P12: ROOTM (00045C00, 00002400) 4.5 MB
P13: seccfg (00048000, 00004000) 8 MB
P14: oemkeystore (0004C000, 00004000) 8 MB
P15: secro (00050000, 00004000) 8 MB
P16: keystore (00054000, 00004000) 8 MB
P17: tee1 (00058000, 00002800) 5 MB
P18: tee2 (0005A800, 00002800) 5 MB
P19: log (0005D000, 00020000) 64 MB
P20: oeminfo (0007D000, 00024000) 72 MB
P21: erecovery (000A1000, 00020000) 64 MB
P22: frp (000C1000, 00000800) 1024 KB
P23: nvdata (000C1800, 00010000) 32 MB
P24: metadata (000D1800, 00012800) 37 MB
P25: system (000E4000, 00600000) 3072 MB
P26: cust (006E4000, 000C8000) 400 MB
P27: cache (007AC000, 00064000) 200 MB
P28: userdata (00810000, 01506C00) 10.51 GB
P29: flashinfo (01D16C00, 00008000) 16 MB
Partition table has been found on device.
Save to D:/Octoplus Back Up/nuova folder...
Reading partition userdata...
ERROR[007]: Command fail.
At sector 10410976
Attempting to read...
Disconnected.
No comments:
Write comments