Sm-z130h flashing done

Selected firmware file: AP_Z130HDDU0CPI1_usr.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-Z130H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing PARAM section...
PARAM section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing ROOTFS section...
ROOTFS section has been written successfully.
Writing SYSTEM-DATA section...
SYSTEM-DATA section has been written successfully.
Writing RAMDISK section...
RAMDISK section has been written successfully.
Writing USER section...
USER section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing DSP section...
DSP section has been written successfully.
Writing FIXNV2 section...
FIXNV2 section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.5 Software version.