How to use a mtc section in a EFT Dongle

How To Use a MTK Section in a EFT Dongle

- For Read info: check "do work" and press on "start" then power off the device and hold on "Volume Down" and connect it to PC
- For Reset FRP: check "do work" and press "start" then power off the device and hold on "Volume Down" and connect it to PC then press "reset frp"
- For Fast Reset FRP: check "frp fast" and press on "start" then power off the device and hold on "Volume Down" and connect it to PC
- For Format Specified Partition: check "advance" and press "start" then power off the device and hold on "Volume Down" and connect it to PC
- For Factory Reset Device: check "factory reset" and press "start" then power off the device and hold on "Volume Down" and connect it to PC
- For Factory Reset 2: check "do work" and press "start" then power off the device and hold on "Volume Down" and connect it to PC then press on "factory reset"
- For Dump ROM: check "read flash dump" and press "start" then power off the device and hold on "Volume Down" and connect it to PC then select all partitions you want to dump then press "read" and you can choose "factory" option if you want to make the firmware erase data
- For Write Flash (dumped by EFT): check "write flash dump" and press "start" then power off the device and hold on "Volume Down" and connect it to PC
- NOTE: if you have problems during connect with device try "auto2" or "auto3"

- For Flashing scatter: check "flash scatter" and check the partitions you want to flash and press "flash" then power off the device and hold on "Volume Down" and connect it to PC