SM G6100 emmc repair done.

i have got the phone dead condition and i ask the phone owner how the phone dead then he told me its was frp on and screen lock then other shop try to remove screen lock then phone got dead. i saw pcb not match with g610. its match with g6100. then i m sure it was converted phone. and done the job.

here the log:-
Compression is ON
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0B00100EE1608FB2, ,FW Ver.: 01.63
CMD Pullup Level:2031 mV
CMD Active Level:2578 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 150100525831424D4210F129D6A283E0
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2016 Rev.0x10
EMMC NAME: RX1BMB , S/N: 4046050978
EMMC NAME (HEX): 525831424D4200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: RX1BMB_4046050978_20190310_1826.extcsd
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 61071326
Found Data areas (firmware parts) count is: 40
Partition info successfully found
---------------------------------------------
P0 (SBL1) [0x400000 0x80000] Size: 512.0KB
P1 (SBL1BAK) [0x480000 0x80000] Size: 512.0KB
P2 (DDR) [0x500000 0x80000] Size: 512.0KB
P3 (RPM) [0x580000 0x80000] Size: 512.0KB
P4 (TZ) [0x600000 0x200000] Size: 2.0MB
P5 (ABOOT) [0x800000 0x200000] Size: 2.0MB
P6 (SEC) [0xa00000 0x40000] Size: 256.0KB
P7 (LKSECAPP) [0xa40000 0x80000] Size: 512.0KB
P8 (KEYMASTER) [0xac0000 0x40000] Size: 256.0KB
P9 (CMNLIB) [0xb00000 0x40000] Size: 256.0KB
P10 (CMNLIB64) [0xb40000 0x40000] Size: 256.0KB
P11 (FSG) [0xb80000 0x400000] Size: 4.0MB
P12 (PAD) [0xf80000 0x80000] Size: 512.0KB
P13 (MODEMST1) [0x1000000 0x400000] Size: 4.0MB
P14 (MODEMST2) [0x1400000 0x400000] Size: 4.0MB
P15 (EFS) [0x1c00000 0x1000000] Size: 16.0MB
P16 (FSC) [0x2c00000 0x340000] Size: 3.250MB
P17 (SSD) [0x2f40000 0x40000] Size: 256.0KB
P18 (DEVCFG) [0x2f80000 0x40000] Size: 256.0KB
P19 (APDP) [0x2fc0000 0x20000] Size: 128.0KB
P20 (MSADP) [0x2fe0000 0x20000] Size: 128.0KB
P21 (PARAM) [0x3000000 0xc00000] Size: 12.0MB
P22 (BACKUP) [0x3c00000 0x400000] Size: 4.0MB
P23 (BOOT) [0x4000000 0x2000000] Size: 32.0MB
P24 (RECOVERY) [0x6000000 0x2000000] Size: 32.0MB
P25 (BOTA) [0x8000000 0x800000] Size: 8.0MB
P26 (FOTA) [0x8800000 0x400000] Size: 4.0MB
P27 (PERSIST) [0x8c00000 0x2000000] Size: 32.0MB
P28 (PERSISTENT) [0xac00000 0x100000] Size: 1.0MB
P29 (STEADY) [0xad00000 0x100000] Size: 1.0MB
P30 (KEYSTORE) [0xae00000 0x100000] Size: 1.0MB
P31 (CONFIG) [0xaf00000 0x100000] Size: 1.0MB
P32 (DSP) [0xb000000 0x1000000] Size: 16.0MB
P33 (MODEM) [0xc000000 0x6000000] Size: 96.0MB
P34 (APNHLOS) [0x12000000 0x2000000] Size: 32.0MB
P35 (PERSDATA) [0x14000000 0xc00000] Size: 12.0MB
P36 (RESERVED2) [0x14c00000 0x400000] Size: 4.0MB
P37 (SYSTEM) [0x15000000 0xe1000000] Size: 3.515GB
P38 (CACHE) [0xf6000000 0xc800000] Size: 200.0MB
P39 (USERDATA) [0x102800000 0x6453fb000] Size: 25.81GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0015000000 (3.515GB)
Build ID: MMB29M
Display Build ID: MMB29M.G610FXXU1API4
Release ID: 6.0.1
Device Model: SM-G610F
Device Name: on7xltezh
Architecture ABI: arm64-v8a
Device manufacturer: samsung
Device Platform: msm8953
Product ID: on7xltechn
Build Description: on7xltezh-user 6.0.1 MMB29M G610FXXU1API4 release-keys
Samsung CPU: MSM8953
---------------------------------------------
Done.

# dnt go of the model on log i told you its converted from g6100 to g610f. see pcb pics which one i post here.