gt i9060i flashing after dead -mede in vietnam - repair dead boot to octopus done sam problem -plzz gt-i9060i vietnam Board firmware tar md5 file
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9060I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9060I_EMMC_QNW00M.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC KYL00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501004B594C30304D12CE3A6805AE8D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : KYL00M
Product revision : 1.2
Product serial number : (hex) CE3A6805
Manufacturing date : 10/2011
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 1024 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7340032 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/KYL00M_10_02_2019_17_24_35.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00000800) 1024 KB
P20: KERNEL (00022800, 00008000) 16 MB
P21: RECOVERY (0002A800, 00008000) 16 MB
P22: CSC (00032800, 00064000) 200 MB
P23: system (00096800, 00258000) 1200 MB
P24: HIDDEN (002EE800, 00040000) 128 MB
P25: userdata (0032E800, 01A28000) 13.08 GB
Selected pit file: F:/ALL-SAMSUNG/GT/GT-I/I-9060i/Repair_Firmware/GRANDNEOVE3G.pit
Open file "F:/ALL-SAMSUNG/GT/GT-I/I-9060i/4.4.4/I9060IXXU0AOH1_I9060IOJV0AOG2_I9060IXXU0AOG3_HOME. tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition WDSP... Done.
Writing partition MODEM... Done.
Writing partition KERNEL... Done.
Writing partition RECOVERY... Done.
Writing partition CSC... Done.
Writing partition system... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.7.5; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9060I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9060I_EMMC_QNW00M.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC KYL00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501004B594C30304D12CE3A6805AE8D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : KYL00M
Product revision : 1.2
Product serial number : (hex) CE3A6805
Manufacturing date : 10/2011
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 1024 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7340032 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 616448
Number of sectors : 2457600
Device Manufacturer :samsung
Device Platform :sc8830
Build ID :KTU84P
Display Build ID :KTU84P.I9060IXXU0AOH1
Release ID :4.4.4
Device Model :GT-I9060I
Device Name :grandneove3gxx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :grandneove3gxx-user 4.4.4 KTU84P I9060IXXU0AOH1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/KYL00M_10_02_2019_17_39_56.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sboot (00002000, 00001000) 2048 KB
P02: sboot2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: wdsp (00006000, 00002000) 4 MB
P08: modem (00008000, 00004000) 8 MB
P09: modem2 (0000C000, 00004000) 8 MB
P10: tddsp (00010000, 00002000) 4 MB
P11: fota_sig (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: param (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: reserved2 (00022000, 00000800) 1024 KB
P20: kernel (00022800, 00008000) 16 MB
P21: recovery (0002A800, 00008000) 16 MB
P22: csc (00032800, 00064000) 200 MB
P23: system (00096800, 00258000) 1200 MB
P24: hidden (002EE800, 00040000) 128 MB
P25: userdata (0032E800, 01A29800) 13.08 GB
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9060I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9060I_EMMC_QNW00M.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC KYL00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501004B594C30304D12CE3A6805AE8D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : KYL00M
Product revision : 1.2
Product serial number : (hex) CE3A6805
Manufacturing date : 10/2011
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 1024 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7340032 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/KYL00M_10_02_2019_17_24_35.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00000800) 1024 KB
P20: KERNEL (00022800, 00008000) 16 MB
P21: RECOVERY (0002A800, 00008000) 16 MB
P22: CSC (00032800, 00064000) 200 MB
P23: system (00096800, 00258000) 1200 MB
P24: HIDDEN (002EE800, 00040000) 128 MB
P25: userdata (0032E800, 01A28000) 13.08 GB
Selected pit file: F:/ALL-SAMSUNG/GT/GT-I/I-9060i/Repair_Firmware/GRANDNEOVE3G.pit
Open file "F:/ALL-SAMSUNG/GT/GT-I/I-9060i/4.4.4/I9060IXXU0AOH1_I9060IOJV0AOG2_I9060IXXU0AOG3_HOME. tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition WDSP... Done.
Writing partition MODEM... Done.
Writing partition KERNEL... Done.
Writing partition RECOVERY... Done.
Writing partition CSC... Done.
Writing partition system... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.7.5; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9060I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9060I_EMMC_QNW00M.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC KYL00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501004B594C30304D12CE3A6805AE8D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : KYL00M
Product revision : 1.2
Product serial number : (hex) CE3A6805
Manufacturing date : 10/2011
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 1024 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7340032 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 616448
Number of sectors : 2457600
Device Manufacturer :samsung
Device Platform :sc8830
Build ID :KTU84P
Display Build ID :KTU84P.I9060IXXU0AOH1
Release ID :4.4.4
Device Model :GT-I9060I
Device Name :grandneove3gxx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :grandneove3gxx-user 4.4.4 KTU84P I9060IXXU0AOH1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/KYL00M_10_02_2019_17_39_56.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sboot (00002000, 00001000) 2048 KB
P02: sboot2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: wdsp (00006000, 00002000) 4 MB
P08: modem (00008000, 00004000) 8 MB
P09: modem2 (0000C000, 00004000) 8 MB
P10: tddsp (00010000, 00002000) 4 MB
P11: fota_sig (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: param (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: reserved2 (00022000, 00000800) 1024 KB
P20: kernel (00022800, 00008000) 16 MB
P21: recovery (0002A800, 00008000) 16 MB
P22: csc (00032800, 00064000) 200 MB
P23: system (00096800, 00258000) 1200 MB
P24: hidden (002EE800, 00040000) 128 MB
P25: userdata (0032E800, 01A29800) 13.08 GB
No comments:
Write comments