GT-S5280 flash done

Code:

---

Selected PIT file: C:\Users\STONE\Desktop\mintss.pit
Selected AP file: C:\Users\STONE\Desktop\CODE_S5280XXANG1_
1555121_REV03_user_low_ship.tar.md5
Selected CP file: C:\Users\STONE\Desktop\MODEM_S5280XXAMJ1
_REV03.tar.md5
Selected CSC file: C:\Users\STONE\Desktop
\CSC_OJV_S5280OJVANG1_1555121_REV03_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put GT-S5280 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing PIT section...
PIT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing system section...
system section has been written successfully.
Writing userdata section...
userdata section has been written successfully.
Writing modem section...
modem section has been written successfully.
Writing DSP section...
DSP section has been written successfully.
Writing FIXNV2 section...
FIXNV2 section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.7 Software version.

---