world first lenevo PB2-650M mt6735 SECURE done nck box only

read info
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.3
Will be used loader: DA_SWSEC_CRYPTO20_0403.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM28)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (233Gb+24576Mb) HYNIX 0x484247346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A484247346132 : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM463)
This phone have FRP partition.
Build ID: MRA58K
Display ID: PB2-650M_S043_180208_ROW
Version: 6.0
Build Date: Thu Feb 8 10:27:06 CST 2018
Model: Lenovo PB2-650M
Brand: Lenovo
Device: PB2
Sw Internal Version: SW_P98998AA1_V047_M10_E_LENOVO_PHILIP_USR_MP_ROW
Mediatek Version Release: alps-mp-m0.mp1-V2.39.1_wt8735.6t_P78
IMEI[1]: 123456789123456
IMEI[2]: 123456789012345
Wait untill phone will start charging


sec repair
Selected connection metod: Flash Connection
Exe version: NCKBox AndroidMTK 1.8.9.3
Selected phone: ELBRUS
Action : IMEI REPAIR.
IMEI[1] for write : 352922056430092
IMEI[2] for write : 352922059013978
Will be used loader: DA_SWSEC_CRYPTO20_0403.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM28)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (233Gb+24576Mb) HYNIX 0x484247346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A484247346132 : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM463)
Dumping data, wait.
Reading imei
IMEI[1]: 123456789123456
IMEI[2]: 123456789012345
Backup saved: C:\Users\d-max\Documents\Android_MTK\nvram_backup\FLASH_MODE_ NVRAM_MT6735_123456789123456_123456789012345_09_06 _2018_23_41_40.zip
Writing imei
IMEI[1] TO UPDATE: 3528******
IMEI[2] TO UPDATE: 3528******
Generic IMEI OK
Processing dinamic imei.
IMEI[1] TO UPDATE: 352********
IMEI[2] TO UPDATE: 352*******
Wait untill phone will start charging.
All done.