We can not deny that HUAWEI P9 Plus has a generous dollop of luxury to it with the AMOLED screen. So it is a real pity if this amazing experience got stuck by a broken glass lens.
The repair steps as following:
Step 1: Start up your phone, testing whether display and touch function works well on the glass-cracked screen.
Step 2: Put the OLED on the Heat Platform to heat it up, 30 seconds later, use a metal pry bar to lift one corner of the screen and spray some 530 cleaner into the gap(Be aware of the 530 cleaner, make sure it does not go inside OLED). After that, separate the OLED and frame preliminarily with plastic pry piece, then separate them completely with Frame Separator.
Step 3: Stick a layer of adhesive tape on the full surface of the cracked screen to prevent further damage. Place the screen upside down on Heat Platform and heat it up for the 30s. Then take it down, put it upside down on the separator machine. Press the vacuum button and use Gold Cutting Wire to separate the glass from OLED screen
Step 4: Use the Glue/POL Film Removing Machine to remove the POL, then use LCM Glue Cleaner to remove OCA residue. After all has been done, clean it up with N-hexane.
Step 5: Align POL film and OCA respectively to the OLED, then laminate with the help of OCA Laminating Machine.
Step 6: Put the OLED into Alignment Mold, tear off the protective film on OCA glue and align glass lens to it. Turn it upside down and take out the OLED screen, then put it into Glass Laminating Machine with a laminate cushion placed under it.
Step 7: Put it into Bubble Removing Machine for 10 minutes. Make sure the OCA is bubble free on OLED.
Step 8: Connect the screen to a motherboard and test the display and touch functionality again, both are OK.
Related article source: https://blog.rewatechnology.com/huaw...s-only-repair/
The repair steps as following:
Step 1: Start up your phone, testing whether display and touch function works well on the glass-cracked screen.
Step 2: Put the OLED on the Heat Platform to heat it up, 30 seconds later, use a metal pry bar to lift one corner of the screen and spray some 530 cleaner into the gap(Be aware of the 530 cleaner, make sure it does not go inside OLED). After that, separate the OLED and frame preliminarily with plastic pry piece, then separate them completely with Frame Separator.
Step 3: Stick a layer of adhesive tape on the full surface of the cracked screen to prevent further damage. Place the screen upside down on Heat Platform and heat it up for the 30s. Then take it down, put it upside down on the separator machine. Press the vacuum button and use Gold Cutting Wire to separate the glass from OLED screen
Step 4: Use the Glue/POL Film Removing Machine to remove the POL, then use LCM Glue Cleaner to remove OCA residue. After all has been done, clean it up with N-hexane.
Step 5: Align POL film and OCA respectively to the OLED, then laminate with the help of OCA Laminating Machine.
Step 6: Put the OLED into Alignment Mold, tear off the protective film on OCA glue and align glass lens to it. Turn it upside down and take out the OLED screen, then put it into Glass Laminating Machine with a laminate cushion placed under it.
Step 7: Put it into Bubble Removing Machine for 10 minutes. Make sure the OCA is bubble free on OLED.
Step 8: Connect the screen to a motherboard and test the display and touch functionality again, both are OK.
Related article source: https://blog.rewatechnology.com/huaw...s-only-repair/
No comments:
Write comments