sm-g390f Galaxy Xcover 4 need help

hello


Selected AP file: C:\Users\Haval\Desktop\G390F
\COMBINATION_OXA_FA70_G390FXXU2ARB1_OXA2ARB1
_CL10868146_QB17058265_REV00_user_mid_noship.tar.m d5
Please put the phone into Download Mode and connect USB cable.
To put SM-G390F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing NAD_FW section...
NAD_FW section has been written successfully.
Writing NAD_REFER section...
NAD_REFER section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G390F
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Reading info...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data
reset"
Performed by 2.7.1.5 Software version.
USB debug is already on on the device :confused:
---------------------------------------------------
i have complet the steps by (Write stock firmware without "recovery.img", "cache.img", and "userdata" partitions)
Welcome to Octoplus Box Samsung software version 2.7.1
Selected BOOT file: C:\Users\Haval\Desktop\G390F\full
\BL_G390FXXU2ARF2_CL13816223_QB18591361_REV00
_user_low_ship.tar.md5
Selected AP file: C:\Users\Haval\Desktop\G390F\full
\AP_G390FXXU2ARF2_CL13816223_QB18591361_REV00
_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\Haval\Desktop\G390F\full
\CP_G390FXXU2ARF1_CP9869942_CL13760198_QB18458821_ REV00
_user_low_ship.tar.md5
Selected CSC file: C:\Users\Haval\Desktop\G390F\full
\HOME_CSC_OXA_G390FOXA2ARF2_CL13816223_QB18591361
_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G390F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
---------------------------------------------------
after that mobile kep restarting :confused::confused::confused::confused: