N920c flashing giving error, please help out!

I wanted to remove this N920C frp and after auto download and flash the custom file, the phone counld not complete booting again and I downloaded android version 7.0 file to flash it and be getting this error below, please how to solve it?


Also at the phone screen am seeing a red error code with this => "sw rev check fail: Device :4 Binary:3"

Am not seeing the first letters well so I don't know if is "hw" or "sw".



Flashing logs;

Welcome to Octoplus Box Samsung software version 2.7.0
-----------------------------------------------------------------------------------
To connect SM-N920C phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected BOOT file: C:\Users\lionfinger\Desktop\downloads\Jake Ducey
\N920C\7.0\BL_N920CXXU3CQC7_CL10809520_QB12837480_ REV00
_user_low_ship.tar.md5
Selected AP file: C:\Users\lionfinger\Desktop\downloads\Jake Ducey
\N920C\7.0\AP_N920CXXU3CQC7_CL10809520_QB12837480_ REV00
_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\lionfinger\Desktop\downloads\Jake Ducey
\N920C\7.0\CP_N920CXXU3CQBB_CP5886698_CL10809520
_QB12738392_REV00_user_low_ship.tar.md5
Selected CSC file: C:\Users\lionfinger\Desktop\downloads\Jake Ducey
\N920C\7.0\CSC_OJV_N920COJV3CQC7_CL10809520_QB1283 7480
_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-N920C into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing Firmware Failed
Performed by 2.7.0 Software version.