eMMC_tool Suite ver. 1.4.9.0 (release date: 12.12.2017)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 2022
EasyJTAG Box Serial = B1AA4ABBBCB35E7A
Card Serial = AA22-0D87
EasyJTAG Box Firmware = 2.23
Changelog:
12.12.2017 (ver 1.4.9.0)
Fix: Bugs that have been found through your crash report
Fix: RandomVerify function
Fix: Creation of GPT for Samsung (write by vendor)
Fix: Failed to mount large Fat partitions (explorer)
Fix: Extraction from contact2.db (explorer)
Fix: Error in the "build.prop" parser
Fix: CID Parser
Add: Support for EasyJtag Plus Box
Add: Path for TempDir and InitialDir (option in settings)
Add: Unpack Lenovo QSB (utilities)
Add: Selecting a PIT file from CSC (write by vendor Samsung)
Add: Detect for encrypted dumps from GPG Box
Add: Detect for FullDiskEncryption Partition (explorer)
Add: LinearVerify of the Partition (read by vendor)
Add: Information base about emmc compatibility (thanks to phonemicrodb)
Add: Resizing the window (for small screen resolutions)
Add: Converting large partitions in SparseImage when reading by vendor (option in settings)
Add: Mounting SparseImage (explorer)
Add: Automatic backup of the EFS partition for Samsung (read by vendor)
Add: Formatting of EFS partition for Samsung on request (write by vendor)
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 18 Mhz
CMD Pullup Level: 2119 mV
CMD Active Level: 3037 mV
EMMC Device Information :
EMMC CID: 150100514E31364D420045B4D003A26F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: QN16MB , EMMC NAME (HEX): 514E31364D42 , S/N: 45B4D003 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 10/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QN16MB_45B4D003_20180807_113308.extcsd
EMMC Init completed.
Warning: Health report is very BAD
Device Life Time Estimation (MLC) [269]: 0x09 80% - 90% device life time used
Device Life Time Estimation (SLC) [268]: 0x09 80% - 90% device life time used
Pre EOL information [267]: 0x01 Normal
Scanning soft partitions
GPT header is found and is valid
Partition: apnhlos, [000000400000 - 000001300000], size: 000000F00000
Partition: modem, [000001300000 - 000004C70000], size: 000003970000
Partition: sbl1, [000004C70000 - 000004CF0000], size: 000000080000
Partition: ddr, [000004CF0000 - 000004CF8000], size: 000000008000
Partition: aboot, [000004CF8000 - 000004EF8000], size: 000000200000
Partition: rpm, [000004EF8000 - 000004F78000], size: 000000080000
Partition: qsee, [000004F78000 - 000004FF8000], size: 000000080000
Partition: qhee, [000004FF8000 - 000005078000], size: 000000080000
Partition: fsg, [000005078000 - 000005378000], size: 000000300000
Partition: sec, [000005378000 - 00000537C000], size: 000000004000
Partition: pad, [00000537C000 - 000005E00000], size: 000000A84000
Partition: param, [000005E00000 - 000006800000], size: 000000A00000
Partition: efs, [000006800000 - 000007600000], size: 000000E00000
Partition: modemst1, [000007600000 - 000007900000], size: 000000300000
Partition: modemst2, [000007900000 - 000007C00000], size: 000000300000
Partition: boot, [000007C00000 - 000008900000], size: 000000D00000
Partition: recovery, [000008900000 - 000009800000], size: 000000F00000
Partition: fota, [000009800000 - 00000A480400], size: 000000C80400
Partition: backup, [00000A480400 - 00000AB7E000], size: 0000006FDC00
Partition: fsc, [00000AB7E000 - 00000AE7E000], size: 000000300000
Partition: ssd, [00000AE7E000 - 00000AE80000], size: 000000002000
Partition: persist, [00000AE80000 - 00000B680000], size: 000000800000
Partition: persistent, [00000B680000 - 00000B700000], size: 000000080000
Partition: persdata, [00000B700000 - 00000C000000], size: 000000900000
Partition: system, [00000C000000 - 00008E000000], size: 000082000000
Partition: cache, [00008E000000 - 00009A800000], size: 00000C800000
Partition: hidden, [00009A800000 - 00009EE00000], size: 000004600000
Partition: userdata, [00009EE00000 - 0001D1FFBE00], size: 0001331FBE00
GPT header successfully parsed
Get firmware version
Brand = samsung
Manufacturer = samsung
Model = SM-J500F
Phone platform = msm8916
CPU Abi = armeabi-v7a
Android release = 6.0.1
Firmware version = MMB29M.J500FXXU1BRC1
Firmware date = Fri Mar 16 15:08:55 KST 2018
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 18 Mhz
CMD Pullup Level: 2117 mV
CMD Active Level: 3038 mV
EMMC Device Information :
EMMC CID: 150100514E31364D420045B4D003A26F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: QN16MB , EMMC NAME (HEX): 514E31364D42 , S/N: 45B4D003 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 10/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QN16MB_45B4D003_20180807_113400.extcsd
EMMC Init completed.
Reading S.M.A.R.T Report ...
Device Life Time Estimation (MLC) [269]: 0x09 80% - 90% device life time used
Device Life Time Estimation (SLC) [268]: 0x09 80% - 90% device life time used
Pre EOL information [267]: 0x01 Normal
Optimal Read Size [266]: 0x00 Not defined
Optimal Write Size [265]: 0x08 32 KB
Optimal Trim Unit Size [264]: 0x01 4 KB
Reading MoviNand S.M.A.R.T Report ...
Card Error mode: Normal
Super Block size: 0x00800000 (8388608 bytes)
Super Page size: 0x00008000 (32768 bytes)
Optimal Write size: 0x00008000 (32768 bytes)
Read Reclaim count: 0x0
Optimal TRIM size: 0x00001000 (4096 bytes)
Erase Unit size: 0x00000000 (0 bytes)
Total Number of banks: 0x1
Initial bad blocks per bank: 5,0,0,0
Runtime bad blocks per bank: 0,0,0,0
Reserved blocks left per bank : 23,0,0,0
All Erase counts (min,avg,max): 1596,2203,19677
SLC Erase counts (min,avg,max): 19590,19659,19677
MLC Erase counts (min,avg,max): 1596,1850,2984
Done
i had done bl+ pit but same problem with me so what will i do for next ?
if done j500f any one pls share success report and procedure
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 2022
EasyJTAG Box Serial = B1AA4ABBBCB35E7A
Card Serial = AA22-0D87
EasyJTAG Box Firmware = 2.23
Changelog:
12.12.2017 (ver 1.4.9.0)
Fix: Bugs that have been found through your crash report
Fix: RandomVerify function
Fix: Creation of GPT for Samsung (write by vendor)
Fix: Failed to mount large Fat partitions (explorer)
Fix: Extraction from contact2.db (explorer)
Fix: Error in the "build.prop" parser
Fix: CID Parser
Add: Support for EasyJtag Plus Box
Add: Path for TempDir and InitialDir (option in settings)
Add: Unpack Lenovo QSB (utilities)
Add: Selecting a PIT file from CSC (write by vendor Samsung)
Add: Detect for encrypted dumps from GPG Box
Add: Detect for FullDiskEncryption Partition (explorer)
Add: LinearVerify of the Partition (read by vendor)
Add: Information base about emmc compatibility (thanks to phonemicrodb)
Add: Resizing the window (for small screen resolutions)
Add: Converting large partitions in SparseImage when reading by vendor (option in settings)
Add: Mounting SparseImage (explorer)
Add: Automatic backup of the EFS partition for Samsung (read by vendor)
Add: Formatting of EFS partition for Samsung on request (write by vendor)
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 18 Mhz
CMD Pullup Level: 2119 mV
CMD Active Level: 3037 mV
EMMC Device Information :
EMMC CID: 150100514E31364D420045B4D003A26F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: QN16MB , EMMC NAME (HEX): 514E31364D42 , S/N: 45B4D003 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 10/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QN16MB_45B4D003_20180807_113308.extcsd
EMMC Init completed.
Warning: Health report is very BAD
Device Life Time Estimation (MLC) [269]: 0x09 80% - 90% device life time used
Device Life Time Estimation (SLC) [268]: 0x09 80% - 90% device life time used
Pre EOL information [267]: 0x01 Normal
Scanning soft partitions
GPT header is found and is valid
Partition: apnhlos, [000000400000 - 000001300000], size: 000000F00000
Partition: modem, [000001300000 - 000004C70000], size: 000003970000
Partition: sbl1, [000004C70000 - 000004CF0000], size: 000000080000
Partition: ddr, [000004CF0000 - 000004CF8000], size: 000000008000
Partition: aboot, [000004CF8000 - 000004EF8000], size: 000000200000
Partition: rpm, [000004EF8000 - 000004F78000], size: 000000080000
Partition: qsee, [000004F78000 - 000004FF8000], size: 000000080000
Partition: qhee, [000004FF8000 - 000005078000], size: 000000080000
Partition: fsg, [000005078000 - 000005378000], size: 000000300000
Partition: sec, [000005378000 - 00000537C000], size: 000000004000
Partition: pad, [00000537C000 - 000005E00000], size: 000000A84000
Partition: param, [000005E00000 - 000006800000], size: 000000A00000
Partition: efs, [000006800000 - 000007600000], size: 000000E00000
Partition: modemst1, [000007600000 - 000007900000], size: 000000300000
Partition: modemst2, [000007900000 - 000007C00000], size: 000000300000
Partition: boot, [000007C00000 - 000008900000], size: 000000D00000
Partition: recovery, [000008900000 - 000009800000], size: 000000F00000
Partition: fota, [000009800000 - 00000A480400], size: 000000C80400
Partition: backup, [00000A480400 - 00000AB7E000], size: 0000006FDC00
Partition: fsc, [00000AB7E000 - 00000AE7E000], size: 000000300000
Partition: ssd, [00000AE7E000 - 00000AE80000], size: 000000002000
Partition: persist, [00000AE80000 - 00000B680000], size: 000000800000
Partition: persistent, [00000B680000 - 00000B700000], size: 000000080000
Partition: persdata, [00000B700000 - 00000C000000], size: 000000900000
Partition: system, [00000C000000 - 00008E000000], size: 000082000000
Partition: cache, [00008E000000 - 00009A800000], size: 00000C800000
Partition: hidden, [00009A800000 - 00009EE00000], size: 000004600000
Partition: userdata, [00009EE00000 - 0001D1FFBE00], size: 0001331FBE00
GPT header successfully parsed
Get firmware version
Brand = samsung
Manufacturer = samsung
Model = SM-J500F
Phone platform = msm8916
CPU Abi = armeabi-v7a
Android release = 6.0.1
Firmware version = MMB29M.J500FXXU1BRC1
Firmware date = Fri Mar 16 15:08:55 KST 2018
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 18 Mhz
CMD Pullup Level: 2117 mV
CMD Active Level: 3038 mV
EMMC Device Information :
EMMC CID: 150100514E31364D420045B4D003A26F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture Name: SAMSUNG , EMMC NAME: QN16MB , EMMC NAME (HEX): 514E31364D42 , S/N: 45B4D003 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 10/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QN16MB_45B4D003_20180807_113400.extcsd
EMMC Init completed.
Reading S.M.A.R.T Report ...
Device Life Time Estimation (MLC) [269]: 0x09 80% - 90% device life time used
Device Life Time Estimation (SLC) [268]: 0x09 80% - 90% device life time used
Pre EOL information [267]: 0x01 Normal
Optimal Read Size [266]: 0x00 Not defined
Optimal Write Size [265]: 0x08 32 KB
Optimal Trim Unit Size [264]: 0x01 4 KB
Reading MoviNand S.M.A.R.T Report ...
Card Error mode: Normal
Super Block size: 0x00800000 (8388608 bytes)
Super Page size: 0x00008000 (32768 bytes)
Optimal Write size: 0x00008000 (32768 bytes)
Read Reclaim count: 0x0
Optimal TRIM size: 0x00001000 (4096 bytes)
Erase Unit size: 0x00000000 (0 bytes)
Total Number of banks: 0x1
Initial bad blocks per bank: 5,0,0,0
Runtime bad blocks per bank: 0,0,0,0
Reserved blocks left per bank : 23,0,0,0
All Erase counts (min,avg,max): 1596,2203,19677
SLC Erase counts (min,avg,max): 19590,19659,19677
MLC Erase counts (min,avg,max): 1596,1850,2984
Done
i had done bl+ pit but same problem with me so what will i do for next ?
if done j500f any one pls share success report and procedure
No comments:
Write comments