Samsung I9505 and G900V restart, please how to solve?

I have two samsung (I9505 and G900V) that keep on restarting and could not enter into recovery mode, I have flashed them and their flashing went through but the problem still persist, please how will I solve it?




Flashing log for I9505;

Welcome to Octoplus Box Samsung software version 2.6.6
-----------------------------------------------------------------------------------
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
Selected AP file: C:\Users\lionfinger\Desktop\I9505\5.0.1
\I9505XXUHOB7_I9505YXYHOB5_I9505XXUHOB7_HOME.tar.m d5
Please put the phone into Download Mode and connect USB cable.
To put GT-I9505 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing SBL2 section...
SBL2 section has been written successfully.
Writing SBL3 section...
SBL3 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.






Flashing log for G900V;

Welcome to Octoplus Box Samsung software version 2.6.6
-----------------------------------------------------------------------------------
To connect SM-G900V phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
Selected AP file: C:\Users\lionfinger\Desktop\G900V\6.0.1
\G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2
_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G900V into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.