Sm-t285 tab flashing done

Selected firmware file: AP_T285XXU0ARB1_CL12377429
_QB16863765_REV02_user_low_ship.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-T285 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing l_modem section...
l_modem section has been written successfully.
Writing l_gdsp section...
l_gdsp section has been written successfully.
Writing l_ldsp section...
l_ldsp section has been written successfully.
Writing l_warm section...
l_warm section has been written successfully.
Writing pm_sys section...
pm_sys section has been written successfully.
Writing l_fixnv2 section...
l_fixnv2 section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.