Well this one was different. I used FRP Module 9.01 to do this.
1) Choose model Zenfone AR ZS571KL. (same chipsets)
2) Boot into bootloader and try sending exploit using fastboot method 1.
3) HardReset phone and when it is rebooting you will notice ADB is enabled and with out any AUTH on phone!
4) Quickly run the ADB method. You will notice it fails.
5) Reboot back into bootloader and select USB Debug mode.
6) As it boots watch device manager for ADB to appear. NO need to auth on phone which is odd.. It was automatically authorized for some reason. Perhaps someone can shed some light on how and why? It has never touched this machine before and been auth'd.
7) Again once it appears hit ADB method on UNI Tool.
8) Done.. phone reboots right into OS with no setup wizard.
9) Reset phone and you're all the way done.
Some of these steps aren't 100% needed but it is the process i took that worked. I also might mention i attempted EDL method which began to work but failed.
1) Choose model Zenfone AR ZS571KL. (same chipsets)
2) Boot into bootloader and try sending exploit using fastboot method 1.
3) HardReset phone and when it is rebooting you will notice ADB is enabled and with out any AUTH on phone!
4) Quickly run the ADB method. You will notice it fails.
5) Reboot back into bootloader and select USB Debug mode.
6) As it boots watch device manager for ADB to appear. NO need to auth on phone which is odd.. It was automatically authorized for some reason. Perhaps someone can shed some light on how and why? It has never touched this machine before and been auth'd.
7) Again once it appears hit ADB method on UNI Tool.
8) Done.. phone reboots right into OS with no setup wizard.
9) Reset phone and you're all the way done.
Some of these steps aren't 100% needed but it is the process i took that worked. I also might mention i attempted EDL method which began to work but failed.
No comments:
Write comments