SM-J100H "dead" after flash. How to repair? [Answered]

Selected firmware file: AP_J100HXXU0AOA2_CL332283_QB3547216
_REV01_user_low_ship.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J100H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing system section...
system section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing WDSP section...
WDSP section has been written successfully.
Writing wfixnv2 section...
wfixnv2 section has been written successfully.
Writing PIT section...
PIT section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.5 Software version.