MEO A35 FRP DONE Mediatek Version: V02_170330_MEO_STARNAUTE3_ALTICE_MP

LOAD FIRMWARE HERE
https://pt.wikomobile.com/maj.php?telephone=1702


Action : Meta Info.
Selected Model: 0-By CPU:MT6580
Exe version: NCKDongle AndroidMTK 2.5.8.6
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[70]Detected: MediaTek PreLoader USB VCOM (Android) (COM70)
\\?\usb#vid_0e8d&pid_2000#6&66ca680&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[19]META Port Detected: Gadget CDC VCOM Driver (COM19)
USB\VID_0E8D&PID_2007\6&66CA680&0&5
Start sync target, waiting responce.....
ChipID: MT6580,S01
Using Algo 1.
Brand: MOBIWIRE
Board: UP40_ALTICE_STARNAUTE3
Model: STARNAUTE3
Name: STARNAUTE3
Release: MRA58K
Version: 6.0
Mediatek Version: V02_170330_MEO_STARNAUTE3_ALTICE_MP
Branch: alps-mp-m0.mp1
Platform: MT6580
Reading imei
IMEI[1]: 8f4cbef0f1e18c4
IMEI[2]: 8f4cbef0f1e18c4
Modem Version: WR8.W1449.MD.WG.MP BAND128_HSPA_OT{pDEFAULT
All done.

Exe version: NCKDongle AndroidMTK 2.5.8.6
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM78)
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E5832 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM7)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.