Welcome to Octoplus Pro JTAG Software version 1.5.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : VS880PP
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_VS880PP_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303038474530000B9229CAB19B
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) B9229CA
Manufacturing date : 11/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 704512
Number of sectors : 4194304
Device Manufacturer :lge
Device Platform :msm8226
Build ID :KOT49I.D63110b
Display Build ID :KOT49I.D63110b
Release ID :4.4.2
Device Model :LG-D631
Device Name :b2l_att_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :b2l_att_us-user 4.4.2 KOT49I.D63110b D63110b.1405236114 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/008GE0_18_03_2018_10_45_49.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303038474530000B9229CAB19B
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) B9229CA
Manufacturing date : 11/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 704512
Number of sectors : 4194304
Device Manufacturer :lge
Device Platform :msm8226
Build ID :KOT49I.D63110b
Display Build ID :KOT49I.D63110b
Release ID :4.4.2
Device Model :LG-D631
Device Name :b2l_att_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :b2l_att_us-user 4.4.2 KOT49I.D63110b D63110b.1405236114 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/008GE0_18_03_2018_10_46_00.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
Opening J:/LG/D631/LGD631AT-01-V10b-310-410-JUL-13-2014+0.tot file...
Signature OK.
Signature 2 OK.
Open file "J:/LG/D631/LGD631AT-01-V10b-310-410-JUL-13-2014+0.tot".
Write data verification is enabled.
Writing. Please wait...
Writing partition PrimaryGPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Writing partition aboot... Done.
Writing partition rpmb... Done.
Writing partition tzb... Done.
Writing partition abootb... Done.
Writing partition misc... Done.
Writing partition persist... Done.
Writing partition laf... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition rct... Done.
Writing partition factory... Done.
Writing partition sbl1b... Done.
Writing is finished.
SW: 1.5.5; FW: 1.23.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : VS880PP
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_VS880PP_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303038474530000B9229CAB19B
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) B9229CA
Manufacturing date : 11/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 704512
Number of sectors : 4194304
Device Manufacturer :lge
Device Platform :msm8226
Build ID :KOT49I.D63110b
Display Build ID :KOT49I.D63110b
Release ID :4.4.2
Device Model :LG-D631
Device Name :b2l_att_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :b2l_att_us-user 4.4.2 KOT49I.D63110b D63110b.1405236114 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/008GE0_18_03_2018_10_45_49.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303038474530000B9229CAB19B
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) B9229CA
Manufacturing date : 11/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 704512
Number of sectors : 4194304
Device Manufacturer :lge
Device Platform :msm8226
Build ID :KOT49I.D63110b
Display Build ID :KOT49I.D63110b
Release ID :4.4.2
Device Model :LG-D631
Device Name :b2l_att_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :b2l_att_us-user 4.4.2 KOT49I.D63110b D63110b.1405236114 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/008GE0_18_03_2018_10_46_00.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
Opening J:/LG/D631/LGD631AT-01-V10b-310-410-JUL-13-2014+0.tot file...
Signature OK.
Signature 2 OK.
Open file "J:/LG/D631/LGD631AT-01-V10b-310-410-JUL-13-2014+0.tot".
Write data verification is enabled.
Writing. Please wait...
Writing partition PrimaryGPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Writing partition aboot... Done.
Writing partition rpmb... Done.
Writing partition tzb... Done.
Writing partition abootb... Done.
Writing partition misc... Done.
Writing partition persist... Done.
Writing partition laf... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition rct... Done.
Writing partition factory... Done.
Writing partition sbl1b... Done.
Writing is finished.
SW: 1.5.5; FW: 1.23.
No comments:
Write comments